Santa Fe O Scale Premier FA-2 A Unit Diesel Engine w/Proto-Sound 3.0 (Hi-Rail Wheels)

The American Locomotive Company, one of the nation's premier steam locomotive builders, joined forces with Schenectady, New York neighbor General Electric to build the first standardized diesel-electric locomotives in the 1920s. But when the diesel revolution began in earnest after World War II, Alco seemed doomed to forever playing second fiddle to industry leader EMD.

Observers frequently point to reliability problems with Alco's 1600 hp model 244 diesel motor as the cause. But one wonders today if Alco's problem was really its motor, or EMD's commanding sales lead. During World War II, EMD had been the only company permitted to manufacture road diesels, and shop crews nationwide had learned to service the EMD 567 prime mover. Perhaps a lack of familiarity led to lesser-quality maintenance of Alco motors; as evidence, Alco fans today point to the New Haven, an all-Alco railroad that got great service from its Alco fleet while others complained.

In any case, the brawny good looks of Alco's FA and PA cab units have endeared them to railfans and modelers for more than half a century. Both were styled by Ray Patten, General Electric's head of industrial design, who a decade earlier had received a Lord and Taylor award for a cooking range design "as sightly as a grand piano." Many would argue that Alco's FA-1 and successor FA-2 diesels were both handsomer and more powerful-looking than their major competitors, EMD's F3 and F7 "covered wagons." A signature feature of Alco cab units was the striking ribbed grille surrounding the headlight.

While Alco FAs were sold primarily as freight haulers, they did have room for a passenger-service steam generator at the rear of the engine compartment. Compared with the FA-1, the FA-2 was slightly longer to accommodate a larger steam generator and just a bit more powerful, developing 1600 hp. Alco built FA-2s and cabless FB-2 boosters from 1950 through 1956.

Did You Know?

The FA was offered as an FPA model with optional passenger gearing, but only the Canadian National bought that version.

• Intricately Detailed, Durable ABS Body
• Die-Cast Truck Sides, Pilots and Fuel Tank
• Metal Chassis
• Metal Handrails and Horn
• Moveable Roof Fans
• Metal Body Side Grilles
• (2) Handpainted Engineer Cab Figures
• Authentic Paint Scheme
• Metal Wheels, Axles and Gears
• (2) Remote-Controlled Proto-Couplers
• O Scale Kadee-Compatible Coupler Mounting Pads
• Prototypical Rule 17 Lighting
• Directionally Controlled Constant Voltage LED Headlight
• Lighted LED Cab Interior Light
• Illuminated LED Number Boards
• Lighted LED Marker Lights
• (2) Precision Flywheel-Equipped Motors
• Operating ProtoSmoke Diesel Exhaust
• Onboard DCC/DCS Decoder
• Locomotive Speed Control In Scale MPH Increments
• Proto-Scale 3-2 3-Rail/2-Rail Conversion Capable
• 1:48 Scale Proportions
• Proto-Sound 3.0 With The Digital Command System Featuring Freight Yard Proto-Effects
• Unit Measures: 13" x 2 5/8" x 3 3/4"
• Operates On O-31 Curves 

  Diesel DCC Features 

   

• F0 Head/Tail light
• F1 Bell 
• F2 Horn 
• F3 Start-up/Shut-down 
• F4 PFA 
• F5 Lights (except head/tail)
• F6 Master Volume 
• F7 Front Coupler 
• F8 Rear Coupler 
• F9 Forward Signal 
• F10 Reverse Signal 
• F11 Grade Crossing 
• F12 Smoke On/Off 
• F13 Smoke Volume 
• F14 Idle Sequence 3 
• F15 Idle Sequence 2 
• F16 Idle Sequence 1 
• F17 Extended Start-up 
• F18 Extended Shut-down 
• F19 Rev Up 
• F20 Rev Down 
• F21 One Shot Doppler 
• F22 Coupler Slack 
• F23 Coupler Close 
• F24 Single Horn Blast 
• F25 Engine Sounds
• F26 Brake Sounds
• F27 Cab Chatter
• F28 Feature Reset