Erie O Scale Premier 0-8-8-0 Steam Engine w/Proto-Sound 3.0
Overview
Built in 1907, the 0-8-8-0 articulated was the Erie Railroad's first Mallet type steam locomotive and sported numerous distinctions never-before-found on other railroads.
Not only was Erie's L1 locomotive the largest and most powerful steam locomotive of its era, but it was the only camelback style locomotive built over an articulated 0-8-8-0 chassis. On top of that, the Angus locomotive was hand fired and sported a voracious appetite for steam pressure leading to very little time for the engine's firemen to enjoy the scenic panorama of the Starrucca viaduct.
The L1 obtained the nickname "Angus-type" as a result of noted railroad operations writer Angus Sinclair's comments that the L1 would dry up all the country's canals and make all forms of water transportation obsolete thanks to the engine's incredible thirst. Because only three L1 locomotives were constructed, Sinclair's comments never rang true but the engine did establish the use of Mallet type engines beyond narrow gauge light duty use.
Continuing in its trend of producing obscure yet remarkable locomotives, M.T.H. Electric Trains is proud to return the first die-cast metal recreation of the famous Erie 0-8-8-0 in all its Russian Iron livery. Outfitted with the incredible sounds and features of Proto-Sound 3.0, the L1 comes equipped with two Proto-Couplers for push and pull service destined to create a lasting impression on your model railroad just as it did for the Erie nearly 100 years ago.
Did You Know?
The L1 0-8-8-0 was developed by the Erie for "pusher service" on its Gulf Summit Grade and Susquehanna Hill. Featuring almost 95,000 pounds of tractive force gave the Angus nearly twice the power of a Decapod and allowed the engine to conqour grades that rose 60 feet every mile and curves banked at 5 degrees.
Features
- Die-Cast Boiler and Tender Body
- Die-Cast Metal Chassis
- Authentic Paint Scheme
- Metal Wheels and Axles
- Constant Voltage Headlight
- Die-Cast Truck Sides
- Precision Flywheel Equipped Motor
- Engineer and Fireman Figures
- Operating Firebox Glow
- Metal Handrails and Decorative Bell
- Decorative Metal Whistle
- Operating Marker Lights
- Locomotive Speed Control In Scale MPH Increments
- Lighted Cab Interior
- Synchronized Puffing ProtoSmoke System
- Operating Tender Back-up Light
- Real Coal Load
- (2) Remote Controlled Proto-Couplers
- 1:48 Scale Proportions
- Built-In DCC Receiver
Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won't have access to all of the incredible features of Proto-Sound 3.0, independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time.
When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible:
- (F0) Headlight on/off
- (F1) Bell on/off
- (F2) Whistle/Horn on/off
- (F3) Start-up/Shut-down
- (F4) PFA initiate and advance
- (F5) Cab Light on/off
- (F6) Engine Sounds on/off
- (F7) Volume low, med, high, off
- (F8) Smoke on/off
- (F9) Forward Signal Sound
- (F10) Reverse Signal Sound
- (F11) Coupler Slack Sound
- (F12) Grade Crossing
- (F13) One-Shot Doppler on/off
- (F14) Extended Start Up
- (F15) Extended Shut Down
- (F16) Labor Chuff
- (F17) Drift Chuff
- (F18) Smoke Volume low, med, high
- (F19) Single short whistle toot
- (F20) Coupler Close
- (F21) Feature Reset
- (F22) Idle Sequence 1
- (F23) Idle Sequence 2
- (F24) Idle Sequence 3
- (F25) Idle Sequence 4
- (F26) Brakes auto/off
- (F27) Cab Chatter auto/off
- (F28) Clickety-Clack auto/off
- Proto-Sound 3.0 With The Digital Command System Featuring: Quillable Whistle With Freight Yard Proto-Effects
- Unit Measures:23 1/4" x 2 5/8" x 3 7/8"
- Operates On O-72 Curves